Dynamic allocation of nodes for the OneView drivers¶
https://bugs.launchpad.net/ironic/+bug/1541096
This spec proposes a change in the way the OneView drivers allocate nodes. The new model will allocate resources in OneView only at boot time, avoiding that idle hardware in Ironic is still blocked from OneView’s users perspective.
In this spec, the following terms will be used to refer to OneView resources:
Server Hardware (SH): corresponds to a physical server. A Server Hardware can have only one Server Profile applied at a time.
Server Profile (SP): representation of hardware configuration, such as network configuration, boot settings, firmware version, as well as features configurable through BIOS.
Server Profile Template (SPT): template used to define a reference configuration of a set of Server Profiles.
Problem description¶
The current version of the OneView drivers consider what we call pre-allocation of nodes. This means that when a node is registered in Ironic, there must be a Server Profile applied to the Server Hardware represented by the given node.
In OneView, when a Server Hardware has a Server Profile applied to it, the understanding is that such hardware is being used.
The problem with pre-allocation is that even when a node is available in Ironic and, therefore, there is no instance associated to it, the resource in OneView is considered to be allocated. This means that no other OneView user can use and control this resource.
Therefore, in an environment shared by Ironic and OneView users, to simply allocate a pool of Server Hardware items to Ironic, for which we do not know when they are going to be used, will result in hardware reserved but not in use, which from many perspectives, specially for OneView users, is undesirable.
The ability to dynamically allocate nodes is currently missing from the set of OneView drivers. By adding this feature, the drivers will be able to have OneView resources allocated to Ironic only at boot time. Thus, this will enable the hardware pool to be actually shared among OneView and Ironic users.
Proposed change¶
In order to support dynamic allocation of nodes, some steps in the process of validating and deploying an OneView node need to be changed.
A node will be considered to be free for Ironic when (1) there is no Server Profile applied to the Server Hardware the node represents, or (2) there is a Server Profile applied, but this Server Profile is consistent with what is registered in Ironic’s node data structure. This means that the Server Profile’s URI is equal to the value of the field applied_server_profile_uri in the driver_info namespace of the given node in Ironic.
Therefore, the following rules define the ownership of the node:
SH without server_profile - Free
SH.server_profile == node.driver_info.applied_server_profile_uri - Used by Ironic
SH.server_profile != node.driver_info.applied_server_profile_uri - Used by OneView
When following this approach, a Server Profile is no longer required to validate a node. The validate methods of the Power and Management interfaces of the driver must be changed.
In the proposed model, if a node is not free for Ironic (i.e., it is being used by OneView) the validation will fail. However, as we expect nodes that are used by OneView to be moved to manageable and be cleaned before being made available again in Ironic, if the target_provision_state of a node is manageable, then this check will be skipped.
A node free for Ironic can be claimed by a OneView user at any moment. In that case, the node would still appear to be available in Ironic. To settle this case, a driver periodic task will be issued to detect nodes in use by OneView users and set them to manageable state and put into maintenance mode with a proper maintenance reason message. As soon as the node is freed by the OneView user, another driver periodic task will remove the maintenance mode and provide the node back into available. This is necessary to ensure the node is cleaned before being provided to an Ironic user.
If such node is scheduled for deployment prior to the execution of the periodic task, it will go to the deploy failed state and enter the cleaning process, that should fail since the node is in use by a OneView user. Nova scheduler will be able to pick a different node. A third periodic task will then be responsible to detect such failures and move the node back to manageable state and set maintenance mode until freed.
Some changes in the cleaning process must also be considered. In order to clean a node, a Server Profile needs to be assigned to it. Considering that, if a node has no Server Profile applied to it, a new temporary one will be created based on the Server Profile Template of this node, and applied to such hardware for cleaning purposes. If there is a Server Profile already applied to the node, it will be reused. After the cleaning is complete, in both cases, such Server Profile will be removed.
From a technical perspective, the iscsi_pxe_oneview and agent_pxe_oneview drivers will now implement:
oneview.deploy.OneViewIscsiDeploy
oneview.deploy.OneViewAgentDeploy
Both interfaces will override three methods:
prepare_cleaning:
If the node is in use by OneView, an exception will be raised and the node goes to the clean failed state. Otherwise, cleaning steps will be performed and additional actions taken according to the following:
- If there is no Server Profile assigned to the node’s Server Hardware:
Server Profile will be created according to the Server Profile Template of the node;
Such Server Profile will be applied to the Server Hardware the node represents;
applied_server_profile_uri field will be added to the driver_info namespace of the node;
tear_down_cleaning:
If the node is in use by Ironic, the following actions will be taken:
applied_server_profile_uri field will be deleted from the driver_info namespace of the node;
Server Profile will be removed from the Server Hardware the node represents;
prepare:
If the node is in use by OneView, an exception will be raised and the node goes to a deploy failed state. Otherwise, additional actions will be taken as follows:
Server Profile is applied to the Server Hardware represented by the node. The information required to perform such task will be recovered from the Server Profile Template indicated in the server_profile_template_uri inside the properties/capabilities namespace of the node.
applied_server_profile_uri field will be added to the driver_info namespace of the node;
The interfaces will also implement three new driver periodic tasks:
_periodic_check_nodes_taken_by_oneview:
This driver periodic task will check for nodes that were taken by OneView users while the node is in available state and set the node to maintenance mode with an appropriate maintenance reason message and move the node to manageable state.
_periodic_check_nodes_freed_by_oneview:
This driver periodic task will be responsible to poll the nodes that are in maintenance mode and on manageable state to check if the Server Profile was removed, indicating that the node was freed by the OneView user. If so, it’ll provide the node, that will pass through the cleaning process and become available to be provisioned.
_periodic_check_nodes_taken_on_cleanfail
This last driver periodic task will take care of nodes that would be caught on a race condition between OneView and a deploy by Ironic. In such cases, the validation will fail, throwing the node on deploy fail and, afterwards on clean fail. This task will set the node to maintenance mode with a proper reason message and move it to manageable state, from where the second task can rescue the node as soon as the Server Profile is removed.
A new configuration will be created on [oneview] section to allow operators to manage the interval in which the periodic tasks will run:
[oneview]
...
periodic_check_interval=300
Alternatives¶
Today, there is no other way to enable dynamic allocation of nodes with the OneView drivers.
Data model impact¶
None
State Machine Impact¶
None
REST API impact¶
None
Client (CLI) impact¶
None
“ironic” CLI¶
None
“openstack baremetal” CLI¶
None
RPC API impact¶
None
Driver API impact¶
None
Nova driver impact¶
None
Ramdisk impact¶
N/A
Security impact¶
When a machine previously in use by an OneView user is released, its disks are not erased in the process since OneView does not perform such cleaning tasks. This means that once a node is released, some remaining data from its previous user can be available for Ironic. To prevent this leftover data from being exposed to Ironic users, the driver will move these machines to manageable state through its periodic tasks, where Ironic will require them to go through cleaning before being made available again. Note that if the cleaning feature is disabled in Ironic, OneView users are responsible for manually erase such disks prior to releasing the hardware.
Other end user impact¶
None
Scalability impact¶
None
Performance Impact¶
In most cases, applying a Server Profile in OneView takes less than 2 minutes.
In the few cases it can take longer, e.g. in firmware upgrades, the user must configure timeouts accordingly. Documentation will be provided on how to do it.
The performance impact of the periodic tasks on Ironic conductor will be proportional to the number of nodes being managed since they’ll poll nodes in OneView to check if nodes were taken/returned by OneView users. We’ll minimize that impact by polling only nodes on specific known states as said previously on this spec. Yet, the periodic_check_interval can be adjusted according to OneView usage behavior and the number of nodes enrolled to reach an optimized performance of the conductor.
Other deployer impact¶
After this change is merged, the way the OneView drivers allocate nodes will be different. Deployers should be aware that:
For existing nodes hosting instances, the applied_server_profile_uri field must be added to the driver_info namespace of the node.
Nodes that had a Server Profile assigned to them but were not actually in use (according to the pre-allocation model), can have their Server Profiles removed and still be available in Ironic.
In order to ease this process, a migration tool will be provided. Check Upgrades and Backwards Compatibility for more details.
Developer impact¶
None
Implementation¶
Assignee(s)¶
- Primary assignee:
liliars
- Other contributors:
sinval thiagop gabriel-bezerra marcusrafael nicodemos caiobo
Work Items¶
Implement oneview.deploy.OneViewIscsiDeploy
Implement oneview.deploy.OneViewAgentDeploy
Override prepare, prepare_cleaning, tear_down_cleaning methods for both interfaces
Implement the driver periodic tasks to deal with nodes taken by OneView users
Write tests for such scenarios
Document these changes
Dependencies¶
python-oneviewclient version will be bumped
Testing¶
Unit-tests will be implemented for the changes;
The OneView third party CI will be used to provide a suitable test environment for tests involving a OneView appliance and specific hardware;
Upgrades and Backwards Compatibility¶
As said in Other deployer impact section of this spec, to migrate nodes that are in use with the pre-allocation model, one should add the field applied_server_profile_uri to the driver_info namespace of the node. Nodes that are on available state needs to have their Server Profiles removed. To ease this upgrade process on running deployments of Ironic, a migration tool will be provided and properly referenced in the driver’s documentation.
Operators might have to increase the value of workers_pool_size and periodic_max_workers settings to allow to increase the greethread pool size and allow more than one parallel task to deal with nodes taken/returned on each periodic task as the pool of nodes on OneView increases.
Deprecation policy for pre-allocation:
Newton:
Both pre-allocation and dynamic allocation will be supported
Flag to indicate whether dynamic allocation is enabled in driver_info
Driver defaults to pre-allocation in case the flag is missing
Script provided to ease migration process.
Deprecate pre-allocation feature in the driver code.
Ocata:
Both pre-allocation and dynamic allocation will continue to be supported (due to deprecation process)
P:
Drop support of pre-allocation
Flag ignored.
Documentation Impact¶
OneView drivers documentation will be updated accordingly. Some topics to be addressed are as follow:
Definition of the new dynamic allocation model;
Addition of fields in the node;
Information regarding the migration process from the pre-allocation model;
New configuration options and possible improvements;
References¶
- OneView page
http://www8.hp.com/ie/en/business-solutions/converged-systems/oneview.html
- OneView 2.0 REST API Reference
http://h17007.www1.hp.com/docs/enterprise/servers/oneview2.0/cic-rest/en/content/
- python-oneviewclient
