Power fault recovery

Power fault recovery

https://storyboard.openstack.org/#!/story/1596107

This spec proposes adding a new node field to reflect any faults detected by the system. For nodes put into maintenance mode due to power-sync failures, this proposes a mechanims to try to recover the nodes from the failure.

Problem description

Currently, ironic’s API and data model do not differentiate between ironic setting maintenance on a node (for instance, when cleaning fails, or when the power status loop cannot contact the BMC) and an operator setting maintenance on a node (an explicit API action).

This situation makes it difficult to apply any power fault recovery mechanism.

Proposed change

A string field named fault will be added to ironic’s data model for a Node. It will be used to record any detected faults.

The field will be set to one of the following values, depending on the situation (when ironic puts the node into maintenance due to one of these):

  • power failure: when a node is put into maintenance due to power sync failures that exceed max retries.

  • clean failure: when a node is put into maintenance due to failure of a cleaning operation.

  • rescue abort failure: when a node is put into maintenance due to failure of cleaning up during rescue abort.

  • None: there is no fault detected for the node; this is the default value. Since the field is set to a fault when ironic puts the node into maintenance due to a fault, it gets set to None when the node is taken out of maintenance (by ironic or the user).

    For nodes that were in maintenance prior to upgrading to this release, the field will also be None, since we don’t know for sure, if (or what) there had been a fault. Even if there had been, we don’t know whether the operator wants the node in maintenance for other reasons as well.

A periodic task will be added to the conductor. This will operate on nodes with node.fault == power failure. It will try to get the node’s power state. If successful, the node will be taken out of maintenance.

An integer configuration option named [conductor]power_failure_recovery_interval will be added. This is the interval (number of seconds) between each run of the periodic task. The default value is 300 seconds (5 minutes). Setting it to 0 will disable power fault recovery.

Alternatives

Proposals have already been made and rejected to use a combination of maintenance being set and a given maintenance_reason or last_error to do self-healing due to inconsistency.

Specific faults support [1] is proposed but it’s too big and to-date, no consensus has been reached on it.

An earlier version of this spec had proposed a maintenance_type field for the node, instead of a fault field. We prefer the fault field since it better reflects that it is about faults. maintenance_type caused the field to be tied in with the existing maintenance and maintenance_reason fields. Using fault makes it distinct from maintenance; it will make it easier to move forward in the future, should we decide to provide more enhancements that are fault-related, or to separate the notion and handling of faults from maintenance (which some would argue should only be operator-initiated).

Data model impact

A string field named fault will be added to ironic’s node table.

The field will be added to Node object; object version will be incremented.

State Machine Impact

None

REST API impact

The field fault will be added to Node API object, ironic API version will be bumped.

Node-related API endpoints will be affected:

  • POST /v1/nodes
  • GET /v1/nodes
  • GET /v1/nodes/detail
  • GET /v1/nodes/{node_ident}
  • PATCH /v1/nodes/{node_ident}

For requests with older microversion, node.fault is hidden from the response. This will be done in the hide_fields_in_newer_versions().

Field fault is read-only from the API, and can only be modified internally. Any POST/PATCH request to Node with fault set will get 400 (Bad Request).

There is no other impact to API behaviors.

Client (CLI) impact

“ironic” CLI

None

“openstack baremetal” CLI

The CLI will be updated to support field fault, guarded by ironic API microversion.

RPC API impact

None

Driver API impact

None

Nova driver impact

None, although we should update the ironic-virt driver code to also look at this new node.fault field, in addition to the node.maintenance field.

Ramdisk impact

None

Security impact

None

Other end user impact

None

Scalability impact

None

Performance Impact

If the periodic task for recovery is enabled, it will consume some resources on conductor node.

More will be consumed in an environment containing some nodes in maintenance due to power failure.

Other deployer impact

A new option [conductor]power_failure_recovery_interval is introduced to support power failure recovery. The default value is 300 (5 minutes), you have to set to 0 if this feature is not needed.

Developer impact

None

Implementation

Assignee(s)

Primary assignee:
kaifeng
Other contributors:
dtantsur

Work Items

  • Update db layer to include the fault field.
  • Change places where nodes enter/leave maintenance, to set fault accordingly.
  • Add [conductor]power_failure_recovery_interval option to ironic configuration, add periodic task to handle power recovery.
  • API change.

Dependencies

None

Testing

The feature will be covered by unit tests, API change will be covered by tempest test.

Upgrades and Backwards Compatibility

ironic API change is guarded by microversion.

When upgrading, any nodes in maintenance will have node.fault set to None. This is because there is no easy/guaranteed way to determine if a node had been (previously) put into maintenance due to one of our internal faults. Furthermore, even if we could determine whether it was due to a fault, we don’t know whether the operator wants to keep the node in maintenance for other reasons besides the fault.

Should the operator want to take advantage of the power fault recovery mechanism, they could take the nodes out of maintenance. If there are still issues, ironic will do its thing – detect the fault and try to recover.

Documentation Impact

  • Update api-reference.
  • New option will be generated by config generator.
Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.

baremetal-specs