.. This work is licensed under a Creative Commons Attribution 3.0 Unported License. http://creativecommons.org/licenses/by/3.0/legalcode ================================================================ Substitution native OS installation process with image based one ================================================================ https://blueprints.launchpad.net/fuel/+spec/image-based-provisioning [1]_ Problem description =================== First, we use plenty of customizations of OS installation process. It is not always possible to customize native OS installers such as debian-installer and anaconda on that level of customization we need. Besides, supporting customizations requires engineering resources. If you need to support just one set of customization scripts instead of two completely different sets of customizations for anaconda and debian-installer, it requires 2 times less of engineering resources. Second, assembling root file system from scratch on every node during OS provisioning takes a lot of time. It is much more effective to build OS root filesystem just once and then copy it throughout nodes. It is going to take up to 10 times faster than installation process using so called native installers. Proposed change =============== The first aspect of the issue is going to be addressed by implementing fully customizable python script which is supposed to be an installation agent which will do nothing more than making disk partitions, retrieving OS images and copying them on a hard drive. As far as MOS has plenty of customizations even for core CentOS and Ubuntu packages, we need to implement building bare OS images from scratch using anaconda and debootstrap. Those images are supposed to have cloud-init installed and we suggest to use cloud-init built-in capabilities to install and configure puppet and mcollective after first reboot. In the future we'll probably use diskimage-builder to build custom OS images based on those which are distributed by Canonical [2]_ and Red Hat [3]_. OpenStack diskimage-builder is a community tool which is actively developed and potentially can give us a great advantage. Openstack Ironic nowadays seems to be mature enough to be used as a provisioning tool instead of Cobbler. Ironic's scope, however, is strictly limited to cloud environments. It is not going to support hardware without IPMI as well as supporting disk partitioning and other important stuff. Besides, Ironic python agent and Ironic agent driver are not production ready yet. As a result, we suggest to implement disk image based provisioning process mostly on the agent side fully independent on Ironic. It means we are going to implement our own agent partly based on Ironic python agent. We also suggest to use Cobbler as a tool for managing tftp and dhcp services but not for templating kickstarts. As far as we are going to use our own OS installation agent and this agent is supposed to be as simple as possible, we don't need to reboot a node before starting provisioning. Additionally, this approach does not require Cobbler capability to reboot a node into a different profile. Discovery/Installation flow diagram is as follows :: Nailgun Astute Agent Cobbler + + + + | | | PXE boot | | | | | | | | <--------+ | | | | | | Discovery data | | | | | | | <-----------------------+ | | | | | | | Provision task | | | | | | | +---------> | | | | | | | | Provisioning config | | | | | | | +---------> | | | | | | | Launch provisioning | | | | | | | +---------> | | | | | | | | Download image | | | + | | | | | | | Partitioning | | | + | | | | | | | Prepare configdrive | | | + | | | | | | Finish provisioning | | | | | | | <---------+ | | | | | | | | Disable PXE boot | | | | | | | +----------------------> | | | | | | | Reboot | | | | | | | | +---------> | | | | | | | Provisioning task finished| | | | | | | <---------+ | | | + + + + Our suggestion is to put all agent related code into fuel-web/fuel_agent python package and implement provision script as a setuptools entry point: - /usr/bin/provision It is supposed to use mcollective agents uploadfile for uploading provision data (/tmp/provision.json) and then use execute_shell_command for launching provision. Provision data are supposed to come from nailgun provision serializer. We'll change it as little as possible. Perhaps only information about available OS images will be needed to append. Provision script will make partitions according to configuration, download OS images, copy them on a hard drive, prepare configdrive and copy configdrive on a hard drive. Configdrive is a set of configuration files for cloud-init. We assume puppet and mcollective will be configured right after first reboot by cloud-init. So, agent needs to be able to get parameters given in a serialized provisioning data set and put them into a configdrive in the format that cloud-init is able to read. Configdrive is supposed to be put on a separate partition in the end of one of hard drives on a node during provisioning stage. Configdirve is just a file system which has at least the following structure - openstack/latest/meta_data - openstack/latest/user_data where user_data is supposed to be a multipart mime file [4]_. This file will contain puppet and mcollective configurations as well as the executable script implementing all that stuff which now exists as a set of cobbler snippets [6]_. Cloud-init should be configured so as to have so called NoCloud data source as it's only data source (configdrive). Cloud-init configuration file example is here [5]_. Astute provision method will add node records into cobbler, but only to prevent them to boot into bootstrap mode. When adding a node (a system in term of cobbler) cobbler creates MAC<->IP binding on DHCP server for a node and modifies TFTP server configuration creating enforcing a node to boot into installer OS (anaconda or debian-installer). We are planning not to reboot a node until provisioning process is done. Then we will send an additional RPC call to cobbler so as to modify TFTP server configuration in such a way to boot a node with chain loader which tries to find hard drives and boot a node from first of them. Astute provision method should be re-written so as to run provision script on nodes and provide this script with serialized provisioning data generated by nailgun. We are planning to add provision method radio button on "Settings" tab of Fuel web interface, so as to make it possible for user to choose between two provisioning methods "Classic" (anaconda or debian-installer) or "Image" (copying images on a hard drive). It is also planned to extend cluster attributes with the the information about available OS images which are supposed to be built and put on ISO. Alternatives ------------ Another possible way is to integrate Ironic into Fuel. Why not? Because Ironic has a very specific scope which is more about cloud environments when a node is provisioned and leased by a tenant for a while and then it is supposed to be returned to repeat that cycle again. This very specific use case makes Ironic tightly limited in its capabilities. For example, Ironic assumes all partitioning related stuff will be encapsulated either into an image itself or into the configuration stage (not provisioning stage). Ironic also is not going to support OS agent based power management (only IPMI, ILO, DRAC, etc.) That is why it is better to adderess those issues Fuel currently has that are related to provisioning customizations independently on Ironic. Placing partition table into an OS image is going to be a part of DIB capabilities. Currently cloud OS image is just an image of root file system. But what if OS image would be an image of a block device with partition table inside it. It is possible if you use logical volumes which are unlike plain primary partitions extendable. During image building you create logical volume which suits exactly the size of unextended root file system and then after reboot cloud-init will create other primary partitions, place there physical volumes, attach those physical volumes to root volume group and then extend root logical volume and extend root file system. Data model impact ----------------- * Serialized provisioning data format will be changed so as to contain information about available OS images. * It is planned to append provision_metadata json field into nailgun release database model. REST API impact --------------- None Upgrade impact -------------- This change assumes that bootstrap-2 distro and bootstrap-2 profile will be created in Cobbler. bootstrap-2 distro will be bound to initramfs containing fuel_agent. This bootstrap-2 profile will be used for the default Cobbler system. It is supposed that upgrade script will also put two OS images into /var/www/nailgun/targetimages so as to make provision agent able to download them from a master node. Upgrade script will also make database migration in order to add provision_metadata json field into release database model. And it also will patch nailgun provision serializer. It will be possible to use both cobbler based provisioning scheme or image based provisioning scheme for different clusters. Security impact --------------- None Notifications impact -------------------- None Other end user impact --------------------- Probably provisioning progress bar is better to be removed at all as it is going to take as much time as reboot stage usually takes. Another point is that we are going to add a radio button on the settings tab of Fuel UI where user can choose provison method: image based or classic (a.k.a anaconda or debian-installer based). Performance Impact ------------------ Provisioning process is going to take much less time than it usually takes at the moment. Other deployer impact --------------------- As far as we are going to include Ubuntu and Centos OS bare images into ISO, it is going to become around 700M bigger. Developer impact ---------------- Probably UI team cooperation will be necessary to remove provisioning progress bar if it'll be appropriate. Implementation ============== Assignee(s) ----------- Primary assignee: Work Items ---------- - Create make scripts for building bare OS images (Centos and Ubuntu) from scratch and for putting those images into ISO. (Iteration 1) - Re-implement in terms of cloud-init all that stuff which is currently implemented in terms of Cobbler snippets. (Iteration 1) - Create provisioning agent script. (Iteration 1) * partitioning * downloading and copying OS image * preparing and copying configdrive - Testing and debugging. (Iteration 2) * add image based provision case into system tests * make functional tests and integrate them into Fuel CI - Create upgrade module so as to introduce this feature on an existing master node. (Iteration 2) - Create documentation according to this feature Dependencies ============ None Testing ======= Testing approach - Create VM or allocate hardware node. - Deploy tftp + pxelinux and configure pxelinux with bootstrap ramdisk as a default item. Bootstrap ramdisk should contain provisioning script. - Prepare a set of testing provisioning configurations similar to ones generated by provisioning serialier in nailgun. - Run provision script with a set of different configurations one by one, comparing obtained state with required one. Testing is supposed to be implemented according to this document [7]_ Acceptance criteria - OS images built from scratch using MOS repositories must be available via http on Fuel master node ('http://master_ip:8080/targetimages') - After master node upgrade Cobbler must have one additional distro bootstrap-2 and one additional profile bootstrap-2 which are supposed to provide ramdisk with built-in fuel agent. - It must be possible to choose one of two provisioning options "cobbler based" and "image based". Provision method is supposed to be bound to release database model. - During image based provisioning fuel agent must make an appropriate partitioning scheme on a node according to the partitioning data, which is supposed to have the same format as it currently has. - Once provisioning process is done, cloud-init must perform initial node configuration including at least but not limited to network, ssh, puppet and mcollective, so to make it possible to launch deployment process on a node. Documentation Impact ==================== It will be necessary to re-write those parts of Fuel documentation which mention cobbler and provisioning. References ========== .. [1] https://blueprints.launchpad.net/fuel/+spec/image-based-provisioning .. [2] http://cloud-images.ubuntu.com/ .. [3] http://openstack.redhat.com/Image_resources .. [4] https://help.ubuntu.com/community/CloudInit .. [5] http://bazaar.launchpad.net/~cloud-init-dev/cloud-init/trunk/view/head:/config/cloud.cfg .. [6] https://etherpad.openstack.org/p/BOwAMY9pqy .. [7] http://docs.mirantis.com/fuel-dev/devops.html